Save up to $42.01!

Ragge DOGG 4″ FPV H-Frame

$92.00 $49.99

The latest batch of 200h & DoGG frames can comfortably accommodate the Kiss PDB & ESC carrier.

The 200mm HDPE frame offers durability and unparalleled strength to give any level pilot the confidence in flight. Fly with the knowledge that there will be no more arm changes and fewer costly repairs to sensitive & expensive electronics.

This frame has been designed with speed in mind an improvement from the original 200h cut. We have removed the partitions in the arms to improve air flow with the intention of reducing draw and improving on exhaust from the props. We have also removed material from the inside compartment and top plate this has led to a reduction of weight to around 105g this is a frame for the more advance pilot who has found that weight is more of a factor in the builds. With this reduction in weight there have been reductions in the overall strength and durability there is always a trade-off. Not designed for the pilot that is still learning to fly, but with the ease of component transfer in a race environment, by only undoing the motor and fc mounting screws this is easily transferred into a new frame which could make it a viable race frame for pitstop replacement and keep you in the competition for the next race.

Clear

Description

Overview:

The latest batch of 200h & DoGG frames can comfortably accommodate the Kiss PDB & ESC carrier.

The 200mm HDPE frame offers durability and unparalleled strength to give any level pilot the confidence in flight. Fly with the knowledge that there will be no more arm changes and fewer costly repairs to sensitive & expensive electronics.

This frame has been designed with speed in mind an improvement from the original 200h cut. We have removed the partitions in the arms to improve air flow with the intention of reducing draw and improving on exhaust from the props. We have also removed material from the inside compartment and top plate this has led to a reduction of weight to around 105g this is a frame for the more advance pilot who has found that weight is more of a factor in the builds. With this reduction in weight there have been reductions in the overall strength and durability there is always a trade-off. Not designed for the pilot that is still learning to fly, but with the ease of component transfer in a race environment, by only undoing the motor and fc mounting screws this is easily transferred into a new frame which could make it a viable race frame for pitstop replacement and keep you in the competition for the next race.

The Ragg-e DoGG 200 protects your vital components in enclosed shells made up of sturdy protective covers. These unparalleled protective design characteristics are the result of many prototype designs and will still allow the space for all your standard gear, with no restrictions to your component selection.
This frame is designed for 4″ props and up to 22 size motors.

Specifications:

Materials: 12.7 HDPE
Fasteners: Stainless Steel
Size: 200mm diagonally, 155mm wide
Maximum Propeller: 4″
Motor Mount: M3 6mm
Flight Controller Mount: Kiss, NAze or CC3D
Weight 105g

Additional information

Weight 150 g
Dimensions 160 x 160 x 10 mm
Colour

Black & White, Purple & Yellow, Red & Yellow, Blue & Yellow

Reviews

There are no reviews yet.

Be the first to review “Ragge DOGG 4″ FPV H-Frame”

Your email address will not be published. Required fields are marked *

-Brotherhobby Motors & Spares are On Sale Until the 30/09/17- -Every $50 Spent With MRI Gets An Entry Into Our Monthly Draw!- Dismiss