De-Soldering Braid

Multirotor Insanity

Desoldering Braid  / Solder Remover / Copper Wick Cable Wire.

Desoldering Braid  / Solder Remover / Copper Wick Cable Wire.
Type : CP-2015
Length : 0.75M (Disregard Package Markings)
Width : 2.0mm

How to use :
1.Place the de-soldering wick over the solder to be removed,then put the heated soldering iron tip onto the de-soldering wick.The solder will be absorbed.
2.Remove the de-soldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorb-ability may differ depending on the type of solder.Sn63% and 60% (tin content) have good absorb ability.

Package Included :

1 x 2.0mm 0.75m Desoldering Wick CP-2015


Category: Tool

Type: Accessory